3″ – 24″ Ductile Iron Mechanical Joint Compact Fittings

Electrosteel USA provides a full range of compact mechanical joint fittings ranging in size from 3”-24” that are fully compliant with ANSI/AWWA C153/A21.53. EUSA utilizes the lost foam casting method to ensure precise dimensions with each fitting. All EUSA MJ fittings have a metalized zinc coating for added protection from corrosion and are pressure rated for 350 psi.

General Specifications

  • Material: ASTM A536 specified ductile iron
  • Pressure: 3” – 24” diameter rated at 350PSI
  • Testing: Strictly adheres to ANSI/AWWA C153/A21.53 and UL requirements
  • Laying Length: Maintains ANSI/AWWA C153/A21.53 requirements
  • Weights: In pounds, unless otherwise noted, does not include accessories, coatings or linings
  • Flanges: All flanges adhere to ANSI/ASSA C115/A21.15 and ANSI B16.1 class 125 flanges
  • Cement Lining: Conforms to ANSI/AWWA C104/A21.4 — size 3” – 24” single thickness
  • Coating: Asphaltic coating inside and out conforms to ANSI/AWWA C104/A21.4
  • Gaskets: Produced to ANSI/AWWA C111/A21.11 standards
  • T-Bolts/Nuts: Low alloy steel conforming to ANSI/AWWA C111/A21.11 requirements
  • Approvals: Diameters 3” – 12”: Underwriters Laboratories Listed and UL, Diameters 4” and greater: UL/NSF-61
  • Dimensions: Unless otherwise noted, all dimensions in inches
Manufactured Joint Fittings