36 Inch

Pushlock Restrained Flexible Joint – 36 Inch

Performance and Accessories
Size No. of locking segments No. of rubber retainer No. of Clamp Working Pressure Maximum allowable defection Bell Outer Diameter Pull out
36″ 12 1 1 350 PSI 43.4 inch .05 ft

Basic Features

  • Withstand high Working Pressure
  • Normal push-on joint gasket to be used for sealing
  • Easy to assemble and disassemble
  • Suitable for Trenchless Application

Assembly Instruction

  1. Ensure that socket windows are accessible during laying
  2. Clean socket inside and spigot outside
  3. Put the gasket inside the groove like normal push-on joint pipes
  4. Lubricate exposed portion of the gasket and the spigot end.
  5. Align the jointing pipe properly
  6. Push the spigot end by suitable means until it stops. Do not deflect the pipe. Do not remove the lifting device before the complete connection has been made.
  7. Insert the locking segments through the bell window and slide around the pipe. Repeat the same for all the locking segments.
  8. Hold the upper segment and place the rubber retainer in one of the bell windows.
  9. Withdraw the pipe up to the stop locks to remove the slack in the locking segments. Now the assembly is locked. 1
  10. Clamp the locking segments on the pipe, with the clamp, provided with the pipes. 1
  11. Deflect the pipe if required.

Download Complete Specifications